China hydraulic tools

1, the use of Hexagon mold, crimping and good conductivity, not easy to fall off and heat conduction; 2, built-in safety device When the pressure reaches 700KG/cm (12TON) - involved safety protection device, will have a "click" sound the alarm to the operator, stop action. 3, semi automatic rapid pressure relief, pressure connection can be loosened, can quickly reset; 4, built-in combination of oil valve, easy maintenance, less fault; In 5, the pressure regulating valve, without dismantling the whole structure; 6, press the head can be 180 degrees of freedom to rotate without directional restrictions; 7, two speed pump, fast crimping, lengthened handle, crimping easier; 8, glass fiber insulation handle, 20KV insulation, lasts for 5 minutes. YUHUAN SITUTE(SITOOT) TOOLS CO.,LTD. Add:BinGang Industrial Zone,Yuhuan County,Taizhou City,Zhejiang Province,China Tel:0086-576-87229709 Fax:0086-576-87296000 Http://www.china-hydraulic-tools.com Http://www...

J-13 Ratchet Cable Cutter Technical parameters： Cutting Range Cutting 150mm² Prestressed Steel Wire,720mm² ACSR,Prohibit Cutting Cu-AI Cable Weight(kg) 1.9/2.5 Package Fabric bag Size(mm) 345×125×46，(stretch)514×125×46

Find the cause of failure from the following three points in the maintenance, and improve the system: (1) check the leakage of the boom cylinder. The easiest way is to raise the boom to see if there is a clear free fall. If the whereabouts of the obvious removal of oil cylinder inspection, such as the wear ring should be replaced. (2) check valve. First clean the safety valve, check whether the valve wear, such as wear should be replaced. After the installation of the safety valve, if there is no change, and then check the control valve spool wear, the gap is generally limited to the use of 0.06mm, severe wear should be replaced. (3) measuring the pressure of hydraulic pump. If the pressure is low, then the adjustment, plus the pressure is still not up, indicating the serious wear of hydraulic pumps. In general, the main reason for the failure of the boom is that: A. hydraulic pump serious wear. In the low-speed operation of the pump leakage is serious; high speed operation, the pump...

EP-510 Hydraulic Crimping Tools Technical parameters： Crimping Range 16-400mm² Crimping Force 13T Crimping Type Hexagon Stroke 38mm Oil Capcity 145cc Weight 6.8kg Standard Mould 50、70、95、120、150、185、240、300、400mm²

Hydraulic bending machine is mainly used in factories, warehouses, docks, construction, railways, cars and other installation of pipelines and repair. In addition to the elbow function, it can also be used to remove the elbow part (cylinder) as a separate hydraulic jack. Do a thing, will not be very perfect, the use of this machine is also. To this end, today Xiaobian for everyone to introduce the hydraulic pipe bender error should be how to solve the specific look at the following: If the hydraulic bending angle mechanism has a certain error, then it is not because of mold or parallel to the degree of the problem, most probably because of the hydraulic system of the machine tool, there is no guarantee of balance mechanism of cylinder pressure oil evenly into about caused. Then need to adjust. In the use of hydraulic pipe bender, in error, must first check the die bending machine used for wear or damage to the phenomenon, this phenomenon caused by error, can replace a mold. In the i...

1, box design, compact structure, operation button in the upper handle, a single finger can be operated 2, the head can be rotated 350 degrees, suitable for different angle crimping 3, mold purchase: with EP-510C SITUTE(SITOOT) TOOLS CO.,LTD. Add:BinGang Industrial Zone,Yuhuan County,Taizhou City,Zhejiang Province,China Tel:0086-576-87229709 Fax:0086-576-87296000 Http://www.china-hydraulic-tools.com Http://www.sitoot.com E-mail:sitoot@sitoot.com sitoot@126.com

1, bare terminal and sleeve groove point pressure special tools 2, the system is equipped with a safety relief valve, after the standard output automatic pressure relief 3, the mother of the rotation mode of choice, convenient and simple 4, crimping range: bare terminal and casing 14, 22, 38, 60, 70, 80, 100, 150mm2 SITUTE(SITOOT) TOOLS CO.,LTD. Add:BinGang Industrial Zone,Yuhuan County,Taizhou City,Zhejiang Province,China Tel:0086-576-87229709 Fax:0086-576-87296000 Http://www.china-hydraulic-tools.com Http://www.sitoot.com E-mail:sitoot@sitoot.com sitoot@126.com

RC-22Electrical Rebar Cutter(For cutting steel rope) Technical parameters: Model RC-22 Cutting range ø4-ø22mm Voltage 110V/60HZ 220V/50HZ Output 1.6KW Length 550mm Weight 21.5kg Packge Steel case