China hydraulic tools

J-100 Ratchet Cable Cutter Technical parameters： Cutting Range Cutting 3×300mm² And Diameter below 100mm Cu-Ai Armored Cable,Prohibit Cutting Steel cable Weight(kg) 6.2/6.55 Package Fabric bag Size(mm) 482×270×59，(stretch)655×270×59 YUHUAN SITUTE(SITOOT) TOOLS CO.,LTD. Add:BinGang Industrial Zone,Yuhuan County,Taizhou City,Zhejiang Province,China Tel:0086-576-87229709 Fax:0086-576-87296000 Http://www.china-hydraulic-tools.com Http://www.sitoot.com E-mail:sitoot@sitoot.com          sitoot@126.com Facebook: https://www.facebook.com/sitoot Twitter:h https://twitter.com/hydraulic_tools LinkedIn: https://www.linkedin.com/company/yuhuan-situte-sitoot-tools-co.-ltd. Google+: https://plus.google.com/100112816207310014877 Pinterest: https://www.pinterest.com/henryy1952/

J-160 Ratchet Cable Cutter Technical parameters： Cutting Range Cutting Diameter below 160mm Cu-Ai Armored Cable,Prohibit Cutting Steel cable Weight(kg) 10.9/11.25 Package Fabric bag Size(mm) 565×390×58，(stretch)735×390×58

Structure: manual hydraulic steel cutting machine by the hydraulic system, hydraulic cylinder, piston, piston rod, pin, a reset spring, oil storage and discharge and suction valve and other components. Working principle: first the oil discharge valve in a clockwise direction, a pressure rod, piston is improved, the oil valve is opened, the hydraulic oil into the oil chamber; lift pressure rod, hydraulic oil is compressed into the inner cavity of the cylinder, so as to push the piston to move forward, mounted on the front end of the piston moving cutter can cut. Feed off immediately after the counterclockwise rotation to open the valve, under the action of the reset spring, the pressure oil to flow back into the oil chamber, the cutter and automatic retracting cylinder. So the cycle, cut the ribs. YUHUAN SITUTE(SITOOT) TOOLS CO.,LTD. Add:BinGang Industrial Zone,Yuhuan County,Taizhou City,Zhejiang Province,China Tel:0086-576-87229709 Fax:0086-576-...

1, the general use of mineral oil as a working medium, the relative motion surface can be self lubrication, long service life. 2, light weight, small size, small inertia, fast response. 3, hydraulic transmission of various components, can be convenient, flexible layout. 4, automatic overload protection. 5, easy to control, can achieve a wide range of stepless speed regulation (speed range of 2000:1). 6, it is easy to achieve linear motion. 7, it is easy to achieve the automation of the machine, when the use of electro-hydraulic control, not only to achieve a higher degree of automatic control process, and can achieve remote control. YUHUAN SITUTE(SITOOT) TOOLS CO.,LTD. Add:BinGang Industrial Zone,Yuhuan County,Taizhou City,Zhejiang Province,China Tel:0086-576-87229709 Fax:0086-576-87296000 Http://www.china-hydraulic-tools.com Http://www.sitoot.com E-mail:sitoot@sitoot.com          sitoot@126.com Facebook: https://ww...

Suitable for various kinds of steel, iron, copper, aluminum, steel, steel, steel and other forming drilling operations, small volume, light weight, easy operation, labor saving and fast punching. YUHUAN SITUTE(SITOOT) TOOLS CO.,LTD. Add:BinGang Industrial Zone,Yuhuan County,Taizhou City,Zhejiang Province,China Tel:0086-576-87229709 Fax:0086-576-87296000 Http://www.china-hydraulic-tools.com Http://www.sitoot.com E-mail:sitoot@sitoot.com          sitoot@126.com Facebook: https://www.facebook.com/sitoot Twitter:h https://twitter.com/hydraulic_tools LinkedIn: https://www.linkedin.com/company/yuhuan-situte-sitoot-tools-co.-ltd. Google+: https://plus.google.com/100112816207310014877 Pinterest: https://www.pinterest.com/henryy1952/

Application and features: with variable speed control motor piston speed quick stop, fast start user safety hook is high, 180 degree rotation reaches a certain pressure safety valve can be automatically reset with charge reminding function of lack of electricity can joint pressure 1, with infinitely variable speed control piston speed; 2, the motor quickly stop, high user safety; 3, can quickly start, hook type pressure joint can rotate 180 degrees; 4, C type rotary 360 degree pressure joint; 5, the safety valve can automatically reset after reaching a certain pressure, can also be manually reset; 6, when there is a lack of charging reminder function. YUHUAN SITUTE(SITOOT) TOOLS CO.,LTD. Add:BinGang Industrial Zone,Yuhuan County,Taizhou City,Zhejiang Province,China Tel:0086-576-87229709 Fax:0086-576-87296000 Http://www.china-hydraulic-tools.com Http://www.sitoot.com E-mail:sitoot@sitoot.com          sitoot@12...

1, first check the pressed terminal and wire specifications are matched; 2, the lithium battery into the bottom of the body, after the indicator light (for the red light and green light), the green light for the power state, the battery is in a normal state, can be used normally. If the indicator light is not bright, prove that the battery has no electricity, need to charge to use; 3, choose to die pressing, such as pressure terminal specification is 240 L, selected 240 - above the lower die; 4, if the body temperature is higher than 60 degrees, the machine will send alarm, please turn off the motor, waiting for the motor temperature decreased before use. (about 30 minutes) 5, the battery for a period of time after the continuous operation, the voltage is between 13V-15V, the lights start flashing alarm sound, automatically cut off the power, turn off the work, please replace the battery, continue to work. 6, such as the battery in the body for more than 4 hours without tri...

1, when used to handle the slotted end sheathing oil return valve rod, and the oil return valve in a clockwise direction. 2, the hook claw seat adjustment to pull hook catch objects. 3, the handle is inserted into the handle hole of piston rod forward tilt back and forth starting smooth forward, corresponding to claw back, pulled out of the object. 4, the piston of the hydraulic puller? Robin - line have di 50mm, essential? So use extended distance not greater than 50mm, stop when no pull, loosen the oil return valve, piston rod to start back, after a good tune second times repeat 1, 2, 3 steps out of date. 5, to make the piston rod starting back, with only handle grooving to the oil terminal will stem counterclockwise slightly unscrew the piston rod starting in the spring under the effect of gradually shrinking. 6, before use should be according to the drawn objects outside diameter, distance and load capacity, selection of appropriate tonnage hydraulic puller, avoid overload...

Fault analysis and conventional treatment method of bus processing machine: 1, because the transmission chain bus processing machine mostly adopts the rolling friction, so the fault most of the decline in performance for the sports quality caused by reverse. As the gap increases, the positioning accuracy is not up to the requirements, mechanical creep, bearing noise becomes large (especially after a mechanical hard collision prone). This part of the maintenance and often pair preload, are closely related to loose ring and compensation adjustment. 2, this part of the fault automatic tension device, the handle and automatic shift device and spindle motion accuracy decline and so on. Because the bus processing machine adopting the electric automatic control has cancelled the mechanical transmission device, although sometimes transmission but also very simple, the structure is simplified and the fault is greatly reduced. 3, bus processing machine is equipped with a limit switch many lim...

FUNCTION：  This machine is a kind of flat bend copper,aluminum bus dedicated equipment.  CB-150D uses bolt type structure,easy acces to rows of copper and auluminum row center line and the cente rline of the piston in the same plane  CB-200A uses a fixed structure,du rable ,and the plane bending die used to do support.Be equipped with pumps to use.  1.It is designed for bending Cu/AI bus bar.  2.With different bending angles.  3.With width position unit,bus bar won't distort after bending.  4.The unit body could be open so that bended object could be easily taken out after bending.  5.Portable unit could be taken to site or fixed in tactory for batch bending work.  6.Max.bending angle 90 degree.  7.Bended object surface won't be damaged. Technical parameters： Model Thickness of Sheet(mm) Width of Sheet(mm) Output(T) Weight(kg) Remark CB-200A 12 200 25 29 Optional: Manual pump CP-700， Electric pump HHB-700D ...