Battery Crimping Tools Instructions-hydraulic tools
1, first check the pressed terminal and wire specifications are matched;
2, the lithium battery into the bottom of the body, after the indicator light (for the red light and green light), the green light for the power state, the battery is in a normal state, can be used normally. If the indicator light is not bright, prove that the battery has no electricity, need to charge to use;
3, choose to die pressing, such as pressure terminal specification is 240 L, selected 240 - above the lower die;
4, if the body temperature is higher than 60 degrees, the machine will send alarm, please turn off the motor, waiting for the motor temperature decreased before use. (about 30 minutes)
5, the battery for a period of time after the continuous operation, the voltage is between 13V-15V, the lights start flashing alarm sound, automatically cut off the power, turn off the work, please replace the battery, continue to work.
6, such as the battery in the body for more than 4 hours without trial, the chip will cut off the power supply, can not boot, then take out the battery, put it back into normal use.
YUHUAN SITUTE(SITOOT) TOOLS CO.,LTD.
2, the lithium battery into the bottom of the body, after the indicator light (for the red light and green light), the green light for the power state, the battery is in a normal state, can be used normally. If the indicator light is not bright, prove that the battery has no electricity, need to charge to use;
3, choose to die pressing, such as pressure terminal specification is 240 L, selected 240 - above the lower die;
4, if the body temperature is higher than 60 degrees, the machine will send alarm, please turn off the motor, waiting for the motor temperature decreased before use. (about 30 minutes)
5, the battery for a period of time after the continuous operation, the voltage is between 13V-15V, the lights start flashing alarm sound, automatically cut off the power, turn off the work, please replace the battery, continue to work.
6, such as the battery in the body for more than 4 hours without trial, the chip will cut off the power supply, can not boot, then take out the battery, put it back into normal use.
YUHUAN SITUTE(SITOOT) TOOLS CO.,LTD.
Add:BinGang Industrial Zone,Yuhuan County,Taizhou City,Zhejiang Province,China
Tel:0086-576-87229709
Fax:0086-576-87296000
E-mail:sitoot@sitoot.com
sitoot@126.com
sitoot@126.com
Facebook:https://www.facebook.com/sitoot
Twitter:hhttps://twitter.com/hydraulic_tools
LinkedIn:https://www.linkedin.com/company/yuhuan-situte-sitoot-tools-co.-ltd.
LinkedIn:https://www.linkedin.com/company/yuhuan-situte-sitoot-tools-co.-ltd.
Pinterest:https://www.pinterest.com/henryy1952/
Comments
Post a Comment