Rules for safe operation of hydraulic pipe bender-hydraulic tools
When the hydraulic pipe bender is in a state of emergency, you can press the emergency stop button to interrupt the power supply to prevent the occurrence of dangerous events. You need to reboot after the danger has been removed. Make sure the power is turned on before restarting.
1 emergency stop button position
On the operating panel: press this button to stop all motor and servo power.
2 avoid overload
Misuse of machinery and equipment will result in overload of machine parts. The overload may not be deliberate, but it is easy to happen. This is because the bending of the pipe needs to use the torque is greater than the original design torque range.
To confirm the load in the operation of the machine in order to avoid overload load of machine components, otherwise it will affect the life of the machine and the safety of the operator.
Warning! The largest bending capacity is the standard for tensile coefficient of 40Kg/cm2 flexible pipe in general.
Be sure to comply with the technical specifications, otherwise it will cause serious damage to the machine.
3 safety training
Through the pre job training and assessment professional can avoid accidental injury may occur in the production process or the minimum degree. Safety training programs must be supervised and directed by the leadership and management. Managers must be sensitive to the safety of their work in all areas of responsibility.
Appropriate training is necessary in order to achieve maximum protection. Usually should be instilled in the working environment and the operation of the machine safety concept, and mold installation instructions, safety devices and methods of operation and personal safety and other important rules, focus on personal safety awareness.
YUHUAN SITUTE(SITOOT) TOOLS CO.,LTD.
1 emergency stop button position
On the operating panel: press this button to stop all motor and servo power.
2 avoid overload
Misuse of machinery and equipment will result in overload of machine parts. The overload may not be deliberate, but it is easy to happen. This is because the bending of the pipe needs to use the torque is greater than the original design torque range.
To confirm the load in the operation of the machine in order to avoid overload load of machine components, otherwise it will affect the life of the machine and the safety of the operator.
Warning! The largest bending capacity is the standard for tensile coefficient of 40Kg/cm2 flexible pipe in general.
Be sure to comply with the technical specifications, otherwise it will cause serious damage to the machine.
3 safety training
Through the pre job training and assessment professional can avoid accidental injury may occur in the production process or the minimum degree. Safety training programs must be supervised and directed by the leadership and management. Managers must be sensitive to the safety of their work in all areas of responsibility.
Appropriate training is necessary in order to achieve maximum protection. Usually should be instilled in the working environment and the operation of the machine safety concept, and mold installation instructions, safety devices and methods of operation and personal safety and other important rules, focus on personal safety awareness.
YUHUAN SITUTE(SITOOT) TOOLS CO.,LTD.
Add:BinGang Industrial Zone,Yuhuan County,Taizhou City,Zhejiang Province,China
Tel:0086-576-87229709
Fax:0086-576-87296000
E-mail:sitoot@sitoot.com
sitoot@126.com
sitoot@126.com
Facebook:https://www.facebook.com/sitoot
Twitter:hhttps://twitter.com/hydraulic_tools
LinkedIn:https://www.linkedin.com/company/yuhuan-situte-sitoot-tools-co.-ltd.
LinkedIn:https://www.linkedin.com/company/yuhuan-situte-sitoot-tools-co.-ltd.
Pinterest:https://www.pinterest.com/henryy1952/
Comments
Post a Comment