Hydraulic punching machine before use check - hydraulic tools

1, in the machine before use, to check whether there is sundry punch and die blade. (if it must be cleaned before use)

2,In the upper punch (part of the lower punch activities add oil).
3, check whether the cylinder leakage.

YUHUAN SITUTE(SITOOT) TOOLS CO.,LTD.
Add:BinGang Industrial Zone,Yuhuan County,Taizhou City,Zhejiang Province,China
Tel:0086-576-87229709
Fax:0086-576-87296000
Http://www.china-hydraulic-tools.com
Http://www.sitoot.com
E-mail:sitoot@sitoot.com
         sitoot@126.com
Google+:https://plus.google.com/100112816207310014877

Comments

Post a Comment

Popular posts from this blog

SYK-8A Hydraulic Hole Digger Technical parameters

Image
SYK-8A Hydraulic Hole Digger Technical parameters FUNCTION:  1、Compact,light,fast.It could be used on carbon steel plate for digging roundd and square hies in 3mm or below.It could also be used with other specific dies of hole digger.The solid positioning drive lead to approach working point easily.  2、Wide hole digging range .It could be used on switchboard,power transmission panel,meter plate,steel plate to dig hole or punch hole.Operate convenientlylpunched holes smooth without burr.  3、It covers six kinds of dies,two bolts,one washer,hole digger unit and plastic carrying case.  4、It could be used for digging square hole if fitted with square dies.Any specific size of roundand square dies could be ordered. SYK-8A Hydraulic Hole Digger Technical parameters: Model Output (T) Ram stroke (mm) Punching Capacity(mm) Punch Dies(mm) Plate Thickenes Punch Range(mm) Stainless Steel Iron Steel Weight (kg) Volume (cm) SYK-8A 8 22 1.6 3 ø16-ø60 ø16,ø2...
Read more

Structure and working principle of electric hydraulic steel bar cutting machine-hydraulic tools

Image
Construction: electric hydraulic steel bar cutting machine mainly consists of motor, hydraulic transmission system, control device, fixed blade, etc.. Working principle: the motor drives the eccentric shaft to rotate, the eccentric surface of the eccentric shaft termination and the contact piston to perform reciprocating movement, which produces high pressure oil into the oil cylinder piston pump, push the piston in the cylinder, driving the blade forward, and fixed on the support of the fixed blade shear and cut steel. YUHUAN SITUTE(SITOOT) TOOLS CO.,LTD. Add:BinGang Industrial Zone,Yuhuan County,Taizhou City,Zhejiang Province,China Tel:0086-576-87229709 Fax:0086-576-87296000 Http://www.china-hydraulic-tools.com Http://www.sitoot.com E-mail:sitoot@sitoot.com          sitoot@126.com Facebook: https://www.facebook.com/sitoot Twitter:h https://twitter.com/hydraulic_tools LinkedIn: https://www.linkedin.com/company/yu...
Read more

Safety precautions for cutting machine-hydraulic tools

Image
Installation and commissioning 1, steel straightening machine should be installed on a flat solid ground. 2, the installation of the bearing frame, the center of the bearing groove to be aligned with the guide cylinder, the straightening cylinder, the lower cutter hole or the center line of the shear gear groove, and keep straight. 3, after the installation of the machine, must check whether the electrical circuit and parts are damaged, the connection of the machine is reliable, the transmission part is flexible, confirm the error before the trial operation. 4, the first empty machine operation, check the bearing (focus on examination of the straightening cylinder bearing), hammer, knife or cutting gear is working properly. Ensure that no abnormal condition, before feeding, test straightening and cutting. safety precautions in operation 1, according to the straight bar diameter, selecting proper straightening block, traction wheel groove and the rotation speed. Straightening block di...
Read more