Hydraulic tools-The three conditions of the initial adjustment of hydraulic pipe bender

The hydraulic pipe bender in the commissioning of the following conditions:
1, start the bender machine for idling several cycle, to ensure that in normal circumstances, try to cut different thickness from thin to thick. Ensure that the user is familiar with the performance of the pipe bender. The different thickness of the blade must be adjusted to different blade clearance when the test shear is different. If the blade clearance is not adjusted, it will affect the durability of the blade.
2, bending machine in the process of cutting open the pressure gauge switch, observe the oil pressure value, shear 12mm plate pressure should be less than 20MPa. This remote pressure regulating valve No9, the factory pressure setting 20 - 22MPa, the user must comply with this requirement, shall not exceed the provisions of the material surface pressure, resulting in damage to the machine. Sound balance during operation. If there is any noise in the pipe bender, it should be checked.
3, when the operation of the pipe to improve the temperature of the tank when the temperature is <60 degrees off.
SITUTE(SITOOT) TOOLS CO.,LTD.
Add:BinGang Industrial Zone,Yuhuan County,Taizhou City,Zhejiang Province,China
Tel:0086-576-87229709
Fax:0086-576-87296000
E-mail:sitoot@sitoot.com
sitoot@126.com

Comments

Post a Comment

Popular posts from this blog

J-95 Ratchet Cable Cutter Technical parameters

Image
FUNCTION： Stretchable handle lead to low manual labour force.Made of high quality alloy steel,could be durable for long time use.It is easy to cut as Assembled with braket.It is also eay for returning and retract midway. J-95 Ratchet Cable Cutter Technical parameters： Cutting Range Cut 3×185mm², ø75mm    Cu-AI Cable , armored cable Weight(kg) 5.7 Package Fabric bag Size(mm) 446×248×55，(stretch)620×248×55 Cu-AI Cable Armord Cable Seabed Cable ACSR Stell Wire Ropes Prestressed Steel Wire Reinfored Steel Bar Or Chain √ √ × × × × ×
Read more

Hydraulic Gear Puller Usage and precautions-hydraulic tools

Image
1, when used to handle the slotted end sheathing oil return valve rod, and the oil return valve in a clockwise direction. 2, the hook claw seat adjustment to pull hook catch objects. 3, the handle is inserted into the handle hole of piston rod forward tilt back and forth starting smooth forward, corresponding to claw back, pulled out of the object. 4, the piston of the hydraulic puller? Robin - line have di 50mm, essential? So use extended distance not greater than 50mm, stop when no pull, loosen the oil return valve, piston rod to start back, after a good tune second times repeat 1, 2, 3 steps out of date. 5, to make the piston rod starting back, with only handle grooving to the oil terminal will stem counterclockwise slightly unscrew the piston rod starting in the spring under the effect of gradually shrinking. 6, before use should be according to the drawn objects outside diameter, distance and load capacity, selection of appropriate tonnage hydraulic puller, avoid overload...
Read more